Q: Where would you recommend for purchasing nails for period pieces?Ī: This is an easy one, because as far as I know, there are only two possible answers, and the appropriate one depends on what is meant by period.įrom the early 19th-century until the late 19th-century, cut nails were easily available (more easily the later one gets into the century). So, I’ll be tackling some of them on the blog. Eastern on January 30, so I’m afraid we won’t be able to answer all of them before it’s time for our weekly Saturday lunch at Crafts & Vines (outside and socially distanced, of course). I’ve been inundated with questions for the live stream Q&A that Chris and I are doing on Saturday at 11 a.m. Christopher Schwarz Posted in Projects 18 Comments on Plan for a Sheffield Cutler’s Stool Period Pieces & Nails I used a beeswax and organic linseed oil paste. Do any “make pretty” that is necessary for a shop stool. ![]() When the glue is dry, cut the protruding tenons and wedges flush with the seat. You can then saw the legs so the seat is level to the floor. The included angle of the wedge is about 2°.Īssemble the stool with hide glue, driving the wedges into the kerfs. Then use a jack plane or a drawknife to bevel all the corners of the seat, adding comfort. I used a 1.5” diameter “Scotch eye” auger, with a broomstick as the bar. Drill all three legs using the sliding bevel as a guide. Set a sliding bevel to 18° (the resultant angle). The sightlines for the front legs intersect the location of the mortise for the rear leg, as shown on the drawing. Saw the seat to shape and lay out the location of the mortises on the underside of the seat. ![]() I then used a tenon saw to cut a kerf in the end of the tenon for the wedge. I used a hollow auger in a brace and bit. I shaved the legs round with a jack plane and then cut a 1.5” diameter x 2.25” long tenon on one end of each leg.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |